Welcome to YTUnity

One free SpiderTaz Network account works across every network site.

EP4 - Rotating the hull and engine

Dangar Marine Guide 8 months ago

Description

In this video I turn the hull right way up with help from friends, fibreglass a hole in it, then check over an S195ND diesel engine and try to start it with the crank handle.

With the boat flipped, I show the framing inside and talk through ideas for the decking and the plan to paint the interior. I found an old dowelled hole through the hull, so I fill it with three days of epoxy and fibreglass layers (12 in all) using West System epoxy, grind it flat and add a patch over the top. I also touch up paint damaged during the roll.

I then clean up the engine, a single cylinder horizontal four-stroke, radiator-cooled diesel, and work out from the manual how it cools and how to start it. I clean the air and fuel filters, drain the old diesel, refill with fresh fuel and water, and bleed the fuel system. Cranking with the decompression lever is hard work and the engine doesn't start, so the next step is a battery and the starter motor.

For outboard and boat repair information, check out my guide: https://guide.dangarmarine.com.au/

If you're enjoying this channel, please consider becoming a channel member at https://www.youtube.com/channel/UCBsXuIe0nBO3Bi2JmtVk1ZQ/join or making a donation at https://www.paypal.me/dangarstu

T-shirts and other merchandise: https://dangar-marine-shop.fourthwall.com/

Tools and parts I use in these videos: https://www.amazon.com/shop/dangarmarine (as an Amazon Associate I earn from qualifying purchases)

Dangar Marine is proudly sponsored by MarineEngine.com, which supplies spare parts for many brands of outboard motors: https://www.marineengine.com/

Music: https://soundcloud.com/dangarstu

Featured creators

Creators on the SpiderTaz Network

Become a creator →