Welcome to YTUnity

One free SpiderTaz Network account works across every network site.

EP2 - Preparing the hull for paint

Dangar Marine Guide 1 years ago

Description

In this video I sand the old paint off the boat's textured hull by hand, ready for epoxy primer and new paint.

Sydney's wettest August in almost 20 years delayed the start, but once the sun came out I tried a poly pad, thought about a random orbital sander and ended up going old school with 120 grit and a sanding block. The old paint stays in the low spots, so I check that nothing is loose or flaky, and the sanding fairs the hull as well. Soda blasting would be ideal, but the budget is tight. The plan is epoxy primer as a tie coat, then white paint that sands easily, then the red. I also note the waterline by measuring along the keel and the planks.

Along the way I look at the rudder parts and the 14 horsepower engine that Mario left for the boat, visit a sunk Blaxland engine, and share a yerba mate with Carl. Next time, paint.

For outboard and boat repair information, check out my guide: https://guide.dangarmarine.com.au/

If you're enjoying this channel, please consider becoming a channel member at https://www.youtube.com/channel/UCBsXuIe0nBO3Bi2JmtVk1ZQ/join or making a donation at https://www.paypal.me/dangarstu

T-shirts and other merchandise: https://dangar-marine-shop.fourthwall.com/

Tools and parts I use in these videos: https://www.amazon.com/shop/dangarmarine (as an Amazon Associate I earn from qualifying purchases)

Dangar Marine is proudly sponsored by MarineEngine.com, which supplies spare parts for many brands of outboard motors: https://www.marineengine.com/

Music: https://soundcloud.com/dangarstu

Featured creators

Creators on the SpiderTaz Network

Become a creator →