Description
The trailer machine shop is finally getting its first wall!
The complete wall will eventually be 23 feet long, but in this episode I build its first 12-foot section around my 6,000 lb (2,700 kg) Herbert lathe.
I calculate the wall height, lay out the 2x4 studs at 16 inches on center, assemble the frame, and add diagonal bracing to keep it square and rigid.
This is still a temporary, removable structure. Everything is assembled with screws so the workshop can eventually be taken apart or modified.
The next step will be covering the wall with 1/4-inch plywood, building wrap, and eventually an exterior finish.
* * *
The trailer workshop finally gets its first wall!
The total length of the future wall will be 23 feet, but in this series, I'm building the first 12-foot section around a 6,000-pound Herbert lathe.
I calculate the wall height, mark out 2x4 studs at 16-inch centers, assemble the frame, and install diagonal braces for rigidity.
The structure is temporary and disassemblable. Everything is assembled with screws so the workshop can be disassembled or modified later.
The next step is to sheathe the wall with 1/4-inch plywood, building membrane, and exterior material.
#TrailerMachineShop #WallFraming #HerbertLathe
