Description
Practice exercise reference: SOLIDWORKS Practice Problems by Dassault Systèmes.
https://www.solidworks.com/solution/education/practice-problems
📲 Limited 1-on-1 Mentoring Slots Available!
Connect with me for 1-on-1 Mentoring → https://bit.ly/3QckHM4
Superprof → https://www.superprof.co.in/ir/39394113-c267ee
Download the Manas Patnaik App and explore courses:
https://khal.page.link/ThcM
Onshape CAD Challenge 1.8 | Model This Part with Just 2 Sketches
Can you create this 3D part in Onshape using just two sketches and two extrusions?
In this episode of the Onshape CAD Challenge, we solve SOLIDWORKS Practice Problem 1.8 by recreating the part in Onshape, step by step.
The model may look complicated at first, but the key is to plan the sketches carefully and make effective use of symmetry and existing geometry.
What you will learn
How to interpret the front, top, and right-side views of an engineering drawing
How to create a symmetrical sketch using a centerline and the Mirror tool
How to use construction geometry while sketching
How to use existing edges as reference geometry
How to create a second sketch on a new plane
How to use the Up to face end condition in Onshape
How to verify the final model using its volume
The final model is checked against the reference volume of 2,928,250 mm³.
If you are learning Onshape, practicing 3D CAD modeling, or improving your engineering drawing interpretation skills, this challenge will help you understand how to approach a part systematically.
Subscribe for more Onshape CAD Challenges and mechanical engineering tutorials.
#Onshape #CAD #3DCAD #MechanicalEngineering #CADTutorial