Description
If you own a refreshed 2026 Tesla Model Y, the annual brake maintenance procedure is completely different from earlier years. Do not hammer out pins, do not pull your brake pads, and do not apply grease (to the front brakes).
In this video, we cover the official Tesla service procedure for cleaning the calipers, why Tesla explicitly bans lubrication on this brake design, proper torque specs, and the single-use bolt rule that most DIY guides ignore.
Torque Specs & Fastener Sizes:
Wheel Lug Nuts: 21 mm socket | 175 Nm (129 lb-ft)
Front Caliper-to-Knuckle Bolts: External Torx E18 socket | 94 Nm (69.3 lb-ft) (Part: 1088969-00-B)
Rear Caliper-to-Bracket Bolts: External Torx E18 socket | 83 Nm (61.2 lb-ft) (Part: 1088969-00-B)
Read brake sliders bolts - 26.5 Nm (19.5 lb-ft)
Amazon product links
3M Silicone Paste, 08946, 8 oz, Clear: https://extrafudge.com/ref/B005RNEH5O
Permatex 24125 Ceramic Extreme Brake Parts Lubricant: https://extrafudge.com/ref/B0018PSASU
AGM Jack Rod Support Bar – 3.5 Ton Locking Bar: https://extrafudge.com/ref/B0C7JWZSQS
SATA 3-Ton (6,600 lb) Heavy-Duty Steel Floor Jack Ultra-Low Profile Design: https://extrafudge.com/ref/B0FVF7KT56
Astro Tools 78319 19pc 3/8" Drive 6-24mm: https://extrafudge.com/ref/B01JBOT9U2
Wheel Protector Impact Socket Set: https://extrafudge.com/ref/B01JBOT9U2
Capri Tools 1/2 in. Drive 80 ft. lbs. Torque Limiting Extension Bar:
https://extrafudge.com/ref/B08R81K33V
SEESII Upgraded Impact Wrench (not bad at all for occasional use): https://extrafudge.com/ref/B0F9Y8TV5C
VEVOR Digital Torque Wrench 3/8 and 1/2 Inch Drive: https://extrafudge.com/ref/B0F66YH5RC
External Torx E18 socket: https://extrafudge.com/ref/B07RZBT2QB
Use my referral link for your next Tesla: https://www.tesla.com/referral/oren91221
Get the Hubcaps at EVBASE for 20% OFF Code: Ureviews20
Full Collection: https://evbase.biz/41KPHph
TIMESTAMPS / CHAPTERS:
00:00 - Introduction & 2026 Model Y Changes
01:00 - Entering Tesla Service Mode & EPB Release
03:13 - Jacking Up the Car & Safety Puck Placement
05:37 - Removing the Wheel & Tire Wear Check
07:33 - Removing the Rear Brake Caliper (14mm Bolts)
09:16 - Diagnosing Stuck Slider Pins & Pad Inspection
11:28 - Cleaning Rear Pads & Caliper Bracket
12:04 - Removing, Cleaning & Inspecting Slider Pin Boots
15:10 - Applying Silicone Paste & Reassembling Slider Pins
18:56 - Lubricating Brake Pad Slides (Ceramic Lube)
21:10 - Reinstalling Rear Caliper & Torque Specs (26.5 Nm / 19.5 ft-lb)
24:09 - Remounting Wheel & Lug Nut Pre-Tightening
26:24 - Front Brakes Overview (Why No Lube on 2026+ Models)
27:43 - Cleaning Front Brakes with Brake Cleaner
30:41 - Lowering Car & Final Lug Nut Torque (175 Nm / 129 ft-lb)
32:19 - Resetting Tire Rotation in Tesla UI
33:05 - Re-engaging Parking Brake & Exiting Service Mode
34:20 - Outro & Summary
This post contains affiliate links. We may earn a commission at no extra cost to you.
